TM 10-4610-237-12
4.17 TEE ASSEMBLY (9117-Y1) REPAIR
This task consists of:
a.
Disassembly
b.
Cleaning
c.
Inspection
d.
Repair
e.
Assembly
INTIAL SET-UP:
Tools:
Material/Parts:
General Mechanics Tool Kit (Item 1, App. B)
Detergent, General Purpose (Item 1, App. E)
Equipment Condition:
Wiping Rag (Item 2, App. E)
Tee assembly removed (para. 3.4a)
Tape, Anti-seize (Item 3, App. E)
Gasket (2) (Item 3, App. I)
Gasket (3) (Item 12, App. I)
Lockwasher (24) (Item 13, App. I)
NOTE
Ensure that all parts identified as mandatory replacement parts are discarded and replaced with
new components.
a.
Disassembly. Refer to Figure 4-8.
(1)
Disconnect ring (1) from female coupling (9) and remove plug (2).
(2)
Remove gasket (3) from female coupling (9).
(3)
Remove eight nuts (4), lockwashers (5), flat washers (6 and 8), and bolts (7).
(4)
Separate female coupling (9) and gasket (10) from tee (28).
(5)
Remove eight nuts (11), lockwashers (12), flat washers (13 and 15), and bolts (14).
(6)
Separate male coupling (16) and gasket (17) from tee (28).
(7)
Disconnect ring (18) from male coupling (26) and remove cap (20).
(8)
Remove gasket (19) from cap (20).
(9)
Remove eight nuts (21), lockwashers (22), flat washers (23 and 25), and bolts (24).
(10) Separate male coupling (26) and gasket (27) from tee (28).
b.
Cleaning.
(1)
Wash all components with clean water and detergent.
(2)
Rinse components in clean water and dry with wiping rag.
4-31
