TM 10-4930-220-13&P
Figure 4–10. Angle/Bracket/Clamping Adapter Assembly
(5) Orient and position inboard and outboard clamping adapters, (12) and (13), and attach to post
protruding from one skid on tank (2), using two screws (19), and two washers (20). Install hard-
ware only fingertight, enough to retain adapters during positioning of tank. Repeat procedure at
post on the other skid. Note that positions will be reversed (inverted) to maintain the inboard posi-
tion of adapter (13). See Figure 4–9 and Figure 4–10.
(6) Orient and position tank (2) on flatbed and move mounting angles inboard so the angles are flush
against the sides of the tank skids. Keeping mounting angle parallel to trailer edge, as much as
possible, retighten its hardware. Align tank snugly against the secured angle, moving the other
mounting angle with it. See Figure 4–11.
Figure 4–11. Tank Placement and Tiedown Locations.
4-18
