TM 10-5430-240-13&P
0006 00
0006 00-1
OPERATOR, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL
(INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
TANK, FABRIC, COLLAPSIBLE, WATER, 3,000 AND 5,000 GALLONS, SEMI-TRAILER MOUNTED
OPERATION UNDER UNUSUAL CONDITIONS
OPERATION IN EXTREME HEAT
Observe the following precautions when operating the water tank in extreme heat:
1. Protect tank from extreme heat by covering, setting up in a shaded area or by constructing a sun
block.
2. Do not block airflow. Ventilate area around the tank.
3. Avoid unnecessary folding or unfolding of the empty water tank.
OPERATION IN EXTREME COLD
CAUTIONS
If the tank is used in temperatures below freezing [32°F (0°C)], caution must be
used to prevent water in the tank, or in contact with the fluid discharge fittings,
from freezing. If water freezes, damage may occur to the tank and/or fittings.
Avoid any unnecessary handling of the tank, which might cause cracking or
damage to the material.
1. Do not allow ice to accumulate on the tank or the filler/discharge fittings.
2. Keep snow and ice clear of the relief valve assembly.
OPERATION IN SALT WATER AREAS
Clean the filler/discharge fittings with clean water prior to filling or drawing water from the tank.
OPERATION IN SANDY OR DUSTY AREAS
1. Keep all components clean. Keep plugs and caps in place on fittings until ready to use.
2. Cover all components when not in use.
OPERATION AT HIGH ALTITUDES
No special procedures are required for operation at high altitudes.
OPERATION IN MUD
Ensure that the filler/discharge fittings are clean before filling or drawing water from the tank.
OPERATION IN HIGH WIND
Keep the tank as full of drinking water as possible.
OPERATION IN RAIN
If possible, provide adequate drainage ditches to prevent standing pools of water around the tank.
