TM 10 5430-240-13&P 0020 00
0020 00-1
OPERATOR, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL
(INCLUDING REPAIR PARTS SPECIAL TOOLS LIST)
HAND GRIP ASSEMBLY
INSPECTION AND REPLACEMENT
INITIAL SETUP
Tools
Tool Kit, General Mechanic
(Item 1, WP 0027 00)
Torque Wrench, 0-100 ft-lbs
(Item 2, WP 0027 00)
REMOVAL
1. Remove three cap screws (1) and flat washers (2) from hand grip (3) and three bottom clamps (4).
2. Remove the hand grip (3) and bottom clamps (4) from the tank (5).
INSPECTION
1. Inspect hand grip (3) for cracks or damage.
2. If hand grip (3) is cracked or damaged, replace.
Model 3,000 Gallon tank shown (Models 91093, 5,000 Gallon and 91094 similar or identical)
