TM 10 5430-240-13&P 0021 00
0021 00-1
OPERATOR, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL
(INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
TIE-DOWN ASSEMBLY
INSPECTION AND REPLACEMENT
INITIAL SETUP
Tools
Tool Kit, General Mechanic
(Item 1, WP 0027 00)
Materials/Parts
Brush, Scrub
(Item 5, WP 0034 00)
Detergent, General Purpose
(Item 3, WP 0034 00)
Rag, Wiping
(Item 4, WP 0034 00)
REMOVAL
Tie-Down Strap Assembly
1. Remove shackle (1) on each end of strap (2) from eyebolt (3). Remove strap (2) from tank.
2. Remove shackles (1) from strap D-rings (4).
Eyebolt and Retainer Plates
Remove nut (5), lock washer (6) and washer (7) from eyebolt (3). Remove eyebolt (3) and top and
bottom retainer plates (8 and 9) from semi-trailer bed or stake pocket.
INSPECTION
1. Clean ratchet take-up mechanism (10) on strap (2), eyebolts (3), retainer plates (8 and 9) and
attaching hardware with mild soap and water solution. Remove any foreign matter with a stiff bristle
brush. Wipe all parts dry with rags.
2. Inspect strap (2) for abrasions, tears and wear. Inspect ratchet take-up mechanism (10) for cracks,
dents, breaks, jammed mechanisms, missing springs and wear. Replace strap (2) if any parts are
damaged or missing
3. Inspect eyebolt (3), retainer plates (8 and 9) and attaching hardware for breaks, bends and distortion.
Replace damaged parts.
