TM 10-5430-243-12&P 0018 00 Change 1 0018 00-2 Table 1.  Checks Upon Receipt of Material. LOCATION ITEM ACTION Tank Body Tank Body Tank Body Tank Body Tank Body Tank Body Tank Body Tank Body Tank Body Accessories Accessories Accessories Accessories Accessories Accessories Accessories Accessories Accessories Tank Body Drain Assembly Filler and Discharge Couplings Vent Coupling Vent Cap Vent Pipe, 2-inch Diameter Coupling Half Elbow, Female/female Elbow, Female/male Two 8 Ft. x 2-inch Drain Hoses and two 2-inch Ball Valves 10 Ft. x 4-Inch of Filler Discharge Hose 4 Inch Gate Valve (GTA Container Models) with 2 Coupling Halves, 2 x 4- inch flange gaskets, 1 Dust Cap & 1 Dust Plug 4 Inch Ball Valve (Reliance and MPC Models) with 2 Coupling Halves, Dust Cap and gasket & 1 Dust Plug and gasket 2 Inch Ball Valve with 2 Coupling Halves, 1 Dust Cap & 1 Dust Plug 1 Coupling gasket and 1 Dust Cap gasket Repair Kit, Type III On-Board Spare Parts Ground Cloth, if Equipped Hand Receipt & Manual NOTE All attached fittings are wrapped with permanently attached cushioning material. Present.  No cuts or cracks. Assembly is present and sealed by plug. Assemblies are present and sealed by dust caps. Assembly present and sealed by its dust cap. Vent cap is present and flap moves easily.  Gasket present inside cap. Present and threads undamaged. Present and threads undamaged.  Gasket present inside coupling. Present and with gaskets. Present and with gasket. Present and undamaged. Present and undamaged. Present, undamaged and containing 4 gaskets. Present, undamaged and containing 2 gaskets. Present and undamaged. Present and undamaged. Present Present