TM 10-5430-243-12&P
0022 00
Change 1
0022 00-2
SERVICE
1. Clean all parts with detergent and warm water. Dry thoroughly with rags.
2. Inspect all mechanical parts for cracks, dents, breaks, corrosion, and wear. Replace the component if
unserviceable.
ASSEMBLY
1. Coat threads of female coupling (9) with thread sealing compound or anti-seize tape and install female
coupling (9) in ball valve (7).
2. Connect chain (12) and two key rings (13) to dust plug (10) and female coupling (9).
3. Install new gasket (11) on dust plug (10).
4. Push cam-lever arms (8) on female coupling (9) outward, away from body of female coupling (9).
5. Install dust plug (10) in female coupling (9).
6. Push cam-lever arms (8) on female coupling (9) inward toward body of female coupling (9) until
locked.
7. Coat threads of male coupling (3) with thread sealing compound or anti-seize tape, and install male
coupling (3) in ball valve (7).
8. Connect chain (5) and two key rings (6) to male coupling (3) and dust cap (2).
9. Push cam-lever arms (1) on dust cap (2) outward, away from body of dust cap (2).
10. Install dust cap (2) on male coupling (3).
11. Push cam-lever arms (1) on dust cap (2) inward toward body of dust cap (2) until locked.
INSTALLATION
Install the drain ball valve on the drain hose assembly.
END OF WORK PACKAGE
