TM 10-5430-243-12&P 0005 000005 00-9 Change 16. If the gate valve (3) is installed on the filler elbow (4), close the gate valve. If a ball valve is installed on the filler elbow, close the ball valve. 7. Open the water system discharge gate valve (3). If a ball valve is installed to control the water system discharge, open the ball valve. 8. Start the water distribution system discharge (suction) water pumps. 9. Allow water to flow from the tank until required amount is discharged. 10. If the gate valve (3) is installed on the discharge elbow (5), close the gate valve (3). If a ball valve is installed on the discharge elbow, close the ball valve. 11. Close the water distribution system discharge (suction) gate or ball valve. 12. Disconnect the filler/discharge hose from the elbow, if attached. 13. Open the drain fitting ball valve to allow the remaining water to drain from the tank. 14. Close the ball valve when the tank is empty by rotating the handle clockwise. OPERATION OF AUXILIARY EQUIPMENTNo auxiliary equipment is provided with the collapsible fabric water tank assembly. 1 2 3 4 5
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
