TM 10-8110-202-13 & P
e. Remove drum (6) from crate (3) and place it on a clean surface.
NOTE
Save the shipping crate for reuse. The shipping crate can
be reused for mobility and shipment of drum.
4-5. INSPECTION
a. Inspect equipment for damage incurred during shipment.
If the equipment has been damaged,
report damage on DD Form 6, Packaging Improvement Report.
b. Check equipment against the packing slip to see if shipment is complete. Report all dis-
crepancies in accordance with the instructions of DA Pam 738-750.
c. Inspect both coupler valves (1) for:
(1)
(2)
(3)
Missing gaskets (2).
Binding or stuck valve stem (3); check by turning handwheel (4).
Missing, cracked, or broken parts.
d. Refer to illustration on following page and inspect repair kit for:
(1)
(2)
(3)
(4)
Ripped or dirty pouch (1). Also check the pouch for broken or missing snap
fasteners (2).
Missing or damaged pliers (3).
Missing, cracked, or broken wood plugs (4). Repair kit should contain three wood
plugs.
Missing plug assemblies (5). Repair kit should contain six plug assemblies. Also check
plug assemblies for deteriorated rubber, stripped threads, and missing parts.
4-3
