TM5-3820-256-10
LUBRICATION INSTRUCTIONS
MAST, 32 - FOOT
NOTE: THESE LUBRICATION INSTRUCTIONS ARE MANDATORY.
Intervals (on-condition or hard time) and the related man-hour times are based on normal operation. The man-hour time
specified is the time you need to do all services prescribed for a particular interval. On-condition (OC) oil sample
intervals shall be applied unless changed by the Army Oil Analysis Program (AOAP) laboratory. Change the hard time
interval if your lubricants are contaminated or if you are operating the equipment under adverse operating conditions,
including longer-than-usual operating hours. The hard time interval may be extended during periods of low activity. If
extended, adequate preservation precautions must be taken. Hard time intervals will be applied in the event AOAP
laboratory support is not available.
Clean fittings before lubricating. Clean parts with dry cleaning solvent (SD), type If or equivalent. Dry before lubricating.
The lowest level of maintenance authorized to lubricate a point is indicated by one of the following symbols as
appropriate: Operator/Crew (C) and Organizational Maintenance (0).
LUBRICANT - INTERVAL
INTERVAL - LUBRICANT
Figure 3-1. Lubrication Instructions for Mast (Sheet I of 2)
3-2
