TM 5-3820-256-10
(Air Compressor continued)
LUBRICANT CAPACITIES
Air/oil separator
4 gal (15 1)
Total
5 gal (19 1)
OPERATING TEMPERATURES
Maximum ambient temp.
125 deg F (52 deg C)
Air/oil discharge temp.
200 deg F (93 deg C)
Oil injection temp.
160 deg F (71 deg C)
(4)
Sub-Drive Assembly.
PERFORMANCE
Input shaft speed from truck power
take-off 2100 rpm
Output speed to air compressor
clutch
2100 rpm
Output shaft speed to drawworks
bevel gear box 2100 rpm
Output shaft speed to mud pump
drive
2100 rpm
Hydraulic pump output:
Pump (165F103) to rotary
table motor piping:
Displacement per
revolution
3.15 cu in (51.6 cc)
Maximum pressure
5000 psi (345 bar)
Pump (165F104) to mast
cylinder/pulldown piping:
Nominal flow per 1000 rpm
5 gpm (19.2 1/min)
Maximum pressure
3025 psi (210 bar)
Pump (165F105) to oil cooler
motor piping:
Displacement per
revolution
2.30 cu in (38 cc)
Maximum pressure
2100 psi (145 bar)
Pump (165F105) to rotary table
cylinders, breakout wrench,
water and foam injection pump
motor and hydraulic jacks:
Displacement per
revolution
2.30 cu in (38 cc)
Maximum pressure
2100 psi (145 bar)
INPUT POWER
Roller chain drive sprocket
Drive shaft from truck PTO
CAPACITY
Lubricant in sub-drive case
14 qt (13 1)
1-8
