TM 5-3820-256-10 Table 2-28.  Truck Preventive Maintenance Checks and Services ITEM INTERVAL Item to be Procedures Equipment is NO. Inspected Check for and have repaired not ready/ B  D  A  W   M or adjusted as necessary. available if: 1 X Cab/body group Check for dents, damage, rust, or corrosion to the truck exterior and undercarriage. Check interior of truck for damage. Check control console for broken or damaged knobs or handles. 2 X Windshield wiper/washer Check wiper blades for wear.  Replace worn or damaged wiper blades. Check fluid level in windshield washer reservoir.  Add washer fluid (or water) as necessary. 3 X Foot controls, Check pedals for ease of movement. Brake pedal travels Check brake pedal travel to insure to floor without proper braking action.  Remove any stopping. mud accumulations. 4 X Shift lever With clutch engaged, check shift operation. 5 X Steering group Check power steering fluid level.  Add fluid as required. 6 X Exhaust system Check tailpipe and muffler for signs of corrosion or damage.  Inspect mani- folds for rust or corrosion. 7 X Radiator Check level of coolant.  Add anti- Coolant level is freeze as required to fill.  Check very low. around inlet and outlet for signs of leakage.  Check for obstructions in the fins; remove if any. 8 X Drive belts Check the condition of belts; look for fraying or cracking.  Check that belts are properly adjusted.  Tighten if necessary. 9 X Steering pump Check for signs of fluid leaking from the hose connections.   X While driving, listen for unusual noises during turns. 10   X Alternator While driving, check voltmeter for correct indication. 11 X Starter motor While starting engine, listen for unusual noises.  Clicking sounds may indicate a bad motor or solenoid. 2-43