TM 5-3820-256-10
Figure 2-26. Mud pit system.
(2)
Make sure that all hose safety chains are fastened.
(3)
Read and comply with all warning and caution plates (See Figure 2-27.)
(4)
Push in clutch and set transmission shift lever (21, figure 2-14) in fifth gear. Move transfer case lever (28) to
DIR and PTO lever (29) to ENG.
(5)
Start the truck engine as follows:
(a)
In the truck's cab, set the starting switch (15, figure 2-14) to ON.
(b)
At the operator's control console, pull out the STOP switch (5, figure 2-11) and position the throttle (7) at
partial position. Press the start switch (6) and hold until the engine starts. If engine does not start within
30 seconds, release the start switch and allow the starter motor to cool before attempting to start again.
If the engine does not start after three attempts, investigate and resolve the problem before attempting to
start engine again.
2-46
