SERVICE MANUAL
VALVE TRAIN - CAMSHAFT, TAPPETS & PUSH RODS
Section 4
Figure 14. - Camshaft Bushing Puller and Installer Tool
(Part of Camshaft Bearing Service Set)
1.
Back-up Nut (817-18)
2.
Expanding Collet (817-11)
3.
Puller
NOTE: A screwdriver (2, Fig. 15) can be used as
shown to hold the back-up nut so the collet can be
expanded.
Figure 15. - Pulling Camshaft BushingsCGES1853
1.
Bushing Puller and Installing Tool
2.
Screwdriver
7.
When bushings are removed inspect bushing
bores in crankcase for burrs or other roughness
liable to damage bushings when installed.
8.
Inspect valve tappets. Replace any that are
scuffed, scored, cracked or worn.
CGES-185-3
PRINTED IN UNITED STATES OF AMERICA
Page 13
