TM 5-3820-256-24P-1
(5) ITEM column. The Item number is that number assigned to the item as It appears in the figure referenced in
adjacent figure number column.
c.
FIGURE AND ITEM NUMBER INDEX.
(1) FIG. column. This column lists the number of the figure where the item is identified/located in Section II and
III.
(2) ITEM column. The item number is that number assigned to the item as it appears in the figure referenced in
the adjacent figure number column.
(3) STOCK NUMBER column. This column lists the NSN for the item.
(4) CAGEC column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code used to
identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
(5) PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm,
corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering
drawings, specifications standards, and inspection requirements to identify an item or range of items.
5.
SPECIAL INFORMATION.
a. USABLE ON CODE. The usable on code appears in the lower corner of the Description column heading. Usable
on codes are shown as UOC:.." in the Description Column justified left) on the last line applicable item
description/nomenclature. Uncoded items are applicable to all models.
b. ASSOCIATED PUBLICATIONS. The publications listed below pertains to the 600-Foot Well Drilling System and its
components.
Publication
Short Title
TM 5-3820-256-24P-1
Drilling Machine
TM 5-3820-256-24P-2
Drilling Machine Truck
TM 5-3820-256-24P-3
Drilling Rig Tender
TM 5-3820-256-24P-4
Drilling Rig Tender Truck
TM 5-3820-256-10
Operation, Preventive Maintenance and Lubrication of the Well Drilling
System
TM 5-3820-256-24-1
Drilling Machine
TM 5-3820-256-24-2
Support Vehicle
TM 5-3820-256-24-3
Drilling System Trucks
TM 5-3820-256-24-4
Drilling System Trucks
TM 5-3820-256-24-5
Drilling System Trucks
TM 5-3820-256-24-6
Well Completion Kit
NOTE
Associated publications shall not be listed here In combined narrative and RPSTL listings
c. ILLUSTRATIONS - LISTING. The
illustrations
in
this
RPSTL
are
identical
to
those
published
in
TM______________ (higher level P manuals). Only those parts codes "C" or "O' in the third position of the SMR Code are
listed in the tabular listing; therefore, there may be a break in the item number sequence. Only illustrations containing Unit
or Aviation unit authorized items appear in this RPSTL.
NOTE
The above statements shall appear In UNIT or aviation unit level RPSTL's only.
6
