TM 5-3825-226-24
AIR COMPRESSOR
14. Remove the six bolts that hold cylinder block (18) to
the crankcase. Remove cylinder block (18) and the
gasket.
15. Remove the two bolts and remove inlet elbow (19)
and plate (20) from cylinder block (18).
16. Remove inlet valve guides (21) from cylinder block
(18).
17. Remove the unloader mechanism from the cylinder
block as follows:
a)
remove spring (23).
b)
remove saddle (25).
c)
remove plungers (22) and pistons (24).
18. Remove key (27) from the crankshaft.
19. Remove the four bolts and remove front cover (26)
from the crankcase.
3-17
