TM 5-3825-226-24
TRANSMISSION HYDRAULIC CONTROL VALVE
2. Disassemble the selector valve as follows:
a)
Remove bolt (2), the two washers and stop (3)
from valve body (4).
b)
Remove two detent assemblies (I) from each
side of valve body (4).
c)
Remove speed selector valve spool (5).
d)
Remove setscrew (8) and the lock.
e)
Remove two detent assemblies (6) from each
side of the valve body and remove directional
selector valve spool (7).
f)
Remove the speed selector valve assembly (9).
g)
Remove cover (10) and remove the relief valve
assembly.
h)
Remove ring (15), washer(14), spring (13),
plunger (12) from relief valve assembly ( 11).
3-216
