TM 5-3825-226-24
OUTPUT TRANSFER GEARS
10. Remove bolt (8) and the retainer. Remove flange
assembly (7).
11. Remove bolts (9) and use two 3/8"-16 NC forcing
screws to remove cage (11) and the shim.
12. Remove seal (10) from cage (11).
13. Remove the bearing cup from cage (II) with tooling
(A). Remove O-ring seal (12) from the cage.
14. Fasten a hoist to case (14) and put it in the position
shown.
15. Remove the bolts and use two 3/8"-16 NC forcing
screws to remove the cage and shims (13) from case
(14). Keep the shims together for assembly.
16. Remove seal (16) from the bottom of cage (15).
3-220
