TM 5-3825-226-24
OUTPUT TRANSFER GEARS
14
Install gear (16) on output shaft (17).
15.
Heat bearing cone (15) in oil to a maximum
temperature of 275°F (135°C). Install bearing
cone (18) on shaft (17).
16.
Heat bearing cone (18) in oil to a maximum
temperature of 275°F (135°C). Install bearing
cone (18) on shaft (17).
17.
Install output shaft (17) in the output transfer
gear case.
18.
Install O-ring seal (21) on the output shaft rear
bearing cage (20).
19.
Lower the temperature of bearing cup ( 9) and
install it in cage (20).
20.
Install cage (20) on the output transfer gears
case.
3-225
