TM 5-3825-226-24 DIFFERENTIAL AND CARRIER ASSEMBLY 11. Lower the axle housing and wheels to the floor. Remove tooling (A). 12. Remove  all  but  the  top  two  bolts  (9)  that  hold the differential in the axle housing. 13. Put  a  transmission  jack  in  position  under  the differential.        Fasten    the    differential    to    the transmission jack. 14. Remove two bolts (9) and remove the differential and 0-ring.  Weight of the differential is 450 lb. (203 kg). INSTALL DIFFERENTIAL AND CARRIER ASSEMBLY Tools Needed A B 8S7620 Base Assembly 2 8S7650 Cylinder 2 8S7645 Hose Group 1 5P3100 Pump Group 1 8S7640 Stand 2 8S7611 Tube 2 8S7615 Pin 2 8S8048 Saddle 2 1. Fasten  the  differential  to  a  transmission  jack. Position O-ring on differential carrier. 2. Install  the  differential  in  the  axle  housing  with the  transmission  jack.    Tighten  the  bolts  to  a torque of 195 ±  18 lb. ft.  (265 ± 24 N•m). 3. Install  tooling  (A)  under  the  axle  housing.    Lift the machine and remove tooling (B) from under the frame. 4. Lower   the   machine   to   the   floor   and   remove tooling (A). 3-229