TM 5-3825-226-24
CAB
18. Connect oil pressure line (28) at the oil filters.
Connect three electrical connections (29).
19. Connect wire (30) to the solenoid.
20. Connect linkage (32) to the control valve with bolt,
nut and cotter pin. Connect hose (31) to the
control valve.
21. Connect hoses (33) under the cab. Connect hose
(34) to the fitting. Connect ground strap (35) and
hose (34) to the cab with the bolt and washer.
22. Connect the battery cable.
23. Fill the cooling system.
24. Lower the hood.
end by:
a)
install crankcase guard*
*This operation is in the Engine Disassembly and
Assembly.
3-331
