TM 5-3825-226-24
Steering Cylinder
8. Install cap (9) on the cylinder rod.
9. Install seal (10) and grease fitting (11).
END BY:
a) install steering cylinder
Steering Knuckles, Kingpins And Bearings
Remove Steering Knuckles, Kingpins And Bearings
Tools Needed
A
1P520
Driver Group
1
START BY:
a) remove wheel bearings
b) remove tie rods
1. Remove bolts (1) and cover (2) from the top of the
knuckle.
2. Remove upper bearing cup (3) from the knuckle.
7-13
