TM 5-3825-226-24
Disassemble steering Cylinder
START BY:
a) remove steering cylinder
1. Remove grease fitting (2) and seals (1) from the
cylinder shaft.
2. Put identification marks on the cylinder body and caps.
3. Use a soft hammer to remove end cap (3) from the
cylinder rod. Be careful not to damage the finished
surface of the cylinder rod.
4. Remove shaft and cap (4) from the cylinder body.
5. Remove cap (4) from the cylinder rod.
6. Remove all seals (5) from the inside bore of cap (4).
7-10