TM 5-3825-229-14&P
4-23.
CABLES AND TERMINALS
THIS TASK COVERS:
a.
Removal
b.
Installation
INITIAL SETUP:
Tools Required:
Equipment/Materials Required:
Nomenclature:
Ignition Insulation Compound
(Item 8, Appendix E)
General Mechanics
Tool Kit
Equipment Conditions:
Ref
Conditions
4-22
Battery cables disconnected.
4-56
Engine door removed.
WARNING
Wear protective face shield when servicing the battery to
protect the facial skin in case that the battery acid splashes
and would come in contact with the skin and cause burns.
Avoid contact with the eyes. If contact occurs, flush eyes
with cold water and seek immediate medical attention.
Wear rubber gloves and avoid acid contact with the skin. If
contact occurs, flush eyes with cold water and seek
immediate medical attention.
A
Removal.
(1)
Remove nut and washer (4) holding battery
cable (3) on starter (5). Remove battery cable
(3) from starter (5).
(2)
Remove screw and washers (1) and disconnect
cables (2 and 6) from ground.
4-48