TM 5-3825-229-14&P
CHAPTER 3
OPERATOR'S MAINTENANCE
Section I. LUBRICATION INSTRUCTIONS
Paragraph
Title
Page
Number
Number
3-1
GENERAL .........................................................................................................................3-1
3-2
LUBRICATION INSTRUCTIONS .......................................................................................3-1
3-1. GENERAL
NOTE
LUBRICATION
THESE LUBRICATION INSTRUCTIONS ARE MANDATORY
a.
General. Keep all lubricants in closed containers and store in a clean dry place away from heat. Keep container
covers clean, and allow no dust, dirt, or other foreign material to mix with lubricants. Keep all lubrication
equipment clean and ready for use.
b.
Cleaning. Keep all external parts not requiring lubrication free of lubricants. Before lubricating equipment, wipe
all lubrication points free of dirt or grease. Clean all lubrication points after servicing to prevent accumulation of
foreign matter.
c.
Lubrication Points. Service lubrication points at the proper intervals as specified on the lubrication chart.
The intervals specified are based on operating under normal conditions. Operation under unusual conditions
may require modification of recommended intervals.
3-2. LUBRICATION INSTRUCTIONS
a.
Lubrication Under Normal Conditions. For lubrication under normal conditions, refer to the Lubrication Chart.
b.
Lubrication in Cold Weather. For instructions on lubrication in temperatures below 0°F (-180C), refer to FM 9-
207, Operation and Maintenance of Ordnance Material in Cold Weather.
c.
Water Fording. For lubrication instructions before and after fording, refer to TM 9-238.
d.
Lubrication Under Unusual Conditions. After operating in mud, dust, sand, or other unusual conditions, clean
and inspect all lubrication points. Lubricate semitrailer in accordance with the Lubrication Chart.
3-1