TM 5-3895-370-14&P
Table 4-4. Unit Troubleshooting Procedures - CONT.
Malfunction
Test or inspection
Corrective action
TIRES, WHEELS, AND HUBS
37.
WHEEL WOBBLES AND SHIMMIES OR TIRE WEARS UNEVENLY.
Step 1. Check tire pressure.
If tire pressure is not 70 to 80 psi (483-552 kPa), fill or replace tire (TM 9-2610-200-14).
If tire pressure is 70 to 80 psi (483-552 kPa), go to step 2.
Step 2. Inspect lugnuts.
If lugnuts are missing or loose, tighten and replace missing lugnuts.
If lugnuts are not missing or loose, go to step 3.
Step 3. Check wheel balance (TM 9-2610-200-14).
If wheel is not balanced, balance or replace wheel.
If wheel is balanced, go to step 4.
Step 4. Inspect wheel for damage.
If wheel is damaged, replace wheel (para 4-107).
If wheel is not damaged, go to step 5.
Step 5. Inspect spindle, hub, and bearings.
If hub or bearings are damaged, replace hub and/or bearings (para 4-108).
If spindle is damaged, notify DS maintenance.
If spindle, hub, and bearings are not damaged, go to step 6.
Step 6. Inspect axle for looseness.
If axle is loose, notify DS maintenance.
If axle is not loose, fault not corrected. Notify supervisor.
4-42
