TM 5-3895-370-14&P
Table 4-4. Unit Troubleshooting Procedures - CONT.
Malfunction
Test or inspection
Corrective action
AXLE
38.
DISTRIBUTOR FAILS TO FOLLOW TRUCK, PULLS TO ONE SIDE, OR WANDERS.
Step 1. Inspect axle and springs for looseness.
If axle or springs are loose, notify DS maintenance.
If axle or springs are not loose, go to step 2.
Step 2. Inspect spindle, hub, and bearings.
If hub or bearings are damaged, replace hub and/or bearings (para 4-108).
If spindle is damaged, notify DS maintenance.
If spindle, hub, and bearings are not damaged, fault not corrected. Notify supervisor.
4-43
