SHUTDOWN SOLENOID REPLACEMENT

ENGINE SOLENOID REPLACEMENT (cont) - TM-5-3895-370-14P_309

TM-5-3895-370-14P Spreader Aggregate: Towed; 3 Ft Spread FF-8 (NSN 3895-01-329-5096) Manual
Page Navigation
298

TM 5-3895-370-14&P 4-67. SHUTDOWN SOLENOID REPLACEMENT. This task covers: a. Removal b. Installation INITIAL SETUP Tools Equipment Condition Tool kit, general mechanic's: automotive TM or Para Condition Description Para 4-84 Negative battery cable Wrench, torque disconnected. Para 3-6 Rear engine panel Materials/Parts removed. Tags, identification (item 52, Appendix E) Preformed packing a. Removal NOTE Tag and mark all wires before removal. (1) Disconnect wire (1) from terminal lug (2). (2) Remove screw (3), washer (4), and terminal lug (2) from shutdown solenoid (5). (3) Remove shutdown solenoid (5) from fuel injection pump (6). (4) Remove and discard preformed packing (7) from shutdown solenoid (5). b. Installation. (1) Install preformed packing (7) on shutdown solenoid (5). (2) Install shutdown solenoid (5) on injection pump (6). Tighten solenoid 32 lb-ft (43 Nm). (3) Install terminal lug (2) with washer (4) and nut (3) on shutdown solenoid (5). (4) Connect positive wire (1) on terminal lug (2). NOTE Follow-on maintenance: · Install rear engine panel (para 3- 6). · Install negative battery cable (para 4-84). END OF TASK 4-160

Privacy Statement
Press Release
Contact