TM 5-3895-370-14&P
(7)
Install voltmeter gage as follows:
(a)
Install voltmeter (32) on gage panel (16)
with two isolators (43), brace (42), and two
nuts (41).
(b)
Install five
wires
(36
thru
40),
two
lockwashers (35), and nuts (34).
(c)
Connect three wire connector (5) on fuel
gage light lead (33).
(d)
Connect three wire connector (5) on
voltmeter (32).
(8)
Install engine water temperature gage (para 4-
148).
(9)
Install oil pressure gage as follows:
(a)
Install oil pressure gage (26) on gage
panel (16) with two isolators (31), brace
(30), three wires (10, 28, and 29), and two
assembled nuts (27).
4-177
