TM 5-3895-370-14&P
(11)
Remove key switch as follows:
(a)
Remove two screws (80), four wires (25,
29, 51, and 57), and two washers (81)
from key switch (82).
(b)
Remove nut (83) and key switch (82) from
gage panel (16).
(c)
Remove gasket (84) from key switch (82).
Discard gasket.
b. Installation.
(1)
Install key switch as follows:
(a)
Install gasket (84) on key switch (82).
(b)
Install key switch (82) and nut (83) on
gage panel (16).
(c)
Install two washers (81), four wires (25,
29, 51, and 57), and two screws (80) on
key switch (82).
4-173
