TM 5-3895-370-14&P
(8)
Remove safety relay as follows:
(a)
Remove three screws (55), lockwashers
(56), four wires (57 thru 60), and resistor
(61) from safety relay (62). Discard
lockwashers.
(b)
Disconnect wire (63) from resistor (61).
(c)
Remove two screws (64), lockwashers
(65), and three wires (37, 66, and 9) from
safety relay (62). Discard lockwashers.
(d)
Remove nut (67) and safety relay (62)
from gage panel (16).
(9)
Remove fuse holder as follows:
(a)
Disconnect two wires (66 and 68) from
fuse holder (69).
4-171
