TM 5-3895-370-14&P
(b)
Remove two assembled nuts (27), three
wires (10, 28, and 29), brace (30), two
isolators (31), and oil pressure gage (26)
from gage panel (16).
(4)
Remove engine water temperature gage (para
4-148).
(5)
Remove voltmeter gage as follows:
(a)
Disconnect
and
remove
three
wire
connector (5) from voltmeter (32).
(b)
Disconnect fuel gage light lead (33) from
three wire connector (5).
(c)
Remove two nuts (34), lockwashers (35),
and five wires (36 thru 40). Discard
lockwashers.
(d)
Remove two nuts (41), brace (42), two
isolators (43), and voltmeter (32) from
gage panel (16). Discard isolators.
4-169