TM 5-3895-370-14&P
4-94. TRANSMISSION CABLE REPLACEMENT (CONT).
(6)
Remove yoke (11) and nut (13) from cable (2).
(7)
Remove cable (2) from throttle bracket (14).
(8)
Remove and discard lockwasher (15) from cable
(2).
b. Installation.
(1)
Install lockwasher (15) on cable (2).
(2)
Install cable (2) on throttle bracket (14) with nut
(13).
(3)
Install yoke (11) on cable (2).
(4)
Install throttle yoke (11) on hydraulic variable
speed pump shaft (12) with anchor pin (10) and
cotter pin (9).
(5)
Install cable (2) in two clips (7).
(6)
Install cable (2) and two clips (7) on main frame
(8) with two lockwashers (6) and nuts (5).
4-252
