TM 5-3895-370-14&P
(3)
Remove screw (4) from brake spider (5).
WARNING
Retaining rings are under spring
tension. Wear eye protection and
use caution when removing retaining
rings or serious injury to personnel
could result.
(4)
Remove four retaining rings (6), washers (7), two
anchor pins (8), and two shoe assemblies (3)
from brake spider (5). Discard retaining rings.
(5)
Remove two retaining rings (9), spacers (10),
roller pins (11), and rollers (12) from two shoe
assemblies (3). Discard retaining rings.
b. Cleaning/Inspection.
WARNING
· Drycleaning solvent (P-D-680) is TOXIC and flammable. Wear protective goggles
and gloves; use only in a well-ventilated area; avoid contact with skin, eyes, and
clothes and do not breathe vapors. Keep away from heat or flame. Never smoke
when using solvent; the flash point for type I drycleaning solvent is 100°F (38°C)
and for type II is 140"F (60°C). Failure to do so may result in injury or death to
personnel. P-D-680 type III is a substitute for types I and II in this application.
The flash point for type III is 200°F (93°C).
· If personnel become dizzy while using cleaning solvent, immediately get fresh air
and medical help. If solvent contacts skin or clothes, flush with cold water. If
solvent contacts eyes, immediately flush eyes with water and get immediate
medical attention.
(1)
Clean all parts with drycleaning solvent and brush and dry with rags.
(2)
Check all parts for cracks, excessive wear, and metal fatigue.
4-259
