TM 5-3895-370-14&P
4-97. BRAKE ASSEMBLY REPLACEMENT (CONT).
(3)
Measure thickness of brake blocks. If blocks are
less then 1/8 in. (3 mm) thick at thinnest point,
replace brake shoe.
(4)
Replace all parts failing inspection.
c. Installation.
WARNING
Retaining rings are under spring
tension. Wear eye protection and
use caution when installing retaining
rings or serious injury to personnel
could result.
(1)
Install two rollers (12) and roller pins (11),
spacers (10), and retaining rings (9) on two shoe
assemblies (3).
(2)
Position two shoe assemblies (3) on brake
spider (5) and install two anchor pins (8), four
washers (7), and retaining rings (6).
(3)
Install screw (4) on brake spider (5). Tighten
screw to 40 to 50 lb-ft (54-68 Nm).
4-260
