TM 5-3895-370-14&P
(3)
Remove four nuts (5), washers (6), screws (7),
air tank (2), and two isolators (8) from two
mounting brackets (9). Discard isolators.
(4)
If damaged, remove plug (10) from air tank (2).
(5)
If damaged, remove elbow (11) and drain cock
(12) from air tank (2).
(6)
If damaged, remove compression fitting (13)
from air tank (2).
b. Installation.
(1)
If removed, install compression fitting (13) on air
tank (2).
(2)
If removed, install elbow (11) on air tank (2) and
drain cock (12).
(3)
If removed, install plug (10) on air tank (2).
4-269
