TM 5-3895-370-14&P
e.
Installation.
NOTE
If installing left fender, perform Steps
(1 and 2). Otherwise, perform Step
(2) only.
(1)
With aid of assistant, position right fender (9) on
frame (12) and install three spacers (11 and 10),
eight locknuts (6), 16 washers (7), and eight
screws (8). Tighten screws 45 to 50 lb-ft (61-68
Nm).
(2)
Install screw (3), two washers (2), and locknut
(1) on rear hose support (4) and left fender (5).
NOTE
Follow-on maintenance:
· Install tool box (right side only)
(para 4-126).
· Install mudflap (para 4-123).
· Install wheel chock and holder
(para 4-131).
· Install wheel (para 4-107).
END OF TASK
4-313
