HAND SPRAY WAND AND HOSE STORAGE BRACKETS REPLACEMENT (cont)

HAND SPRAY WAND AND HOSE STORAGE BRACKETS REPLACEMENT

HAND SPRAY WAND AND HOSE STORAGE BRACKETS REPLACEMENT (cont) - TM-5-3895-370-14P_473

TM-5-3895-370-14P Spreader Aggregate: Towed; 3 Ft Spread FF-8 (NSN 3895-01-329-5096) Manual
Page Navigation
460

TM 5-3895-370-14&P 4-125. HAND SPRAY WAND AND HOSE STORAGE BRACKETS REPLACEMENT (CONT). (3) If damaged, remove two clips (1) from chain and clip (8) and chain (9). (4) If damaged, remove chain and clip (8) and chain (9) from spring (10). (5) Remove two nuts (11), lockwashers (12), screws (13), and right hand spray wand bracket (14) from main frame (15). Discard lockwashers. NOTE If removing left hand spray wand bracket, perform Steps (6 and 7). Otherwise, go to b. Installation. (6) Remove hydraulic tee (para 4-136). (7) Repeat Step (5) above to remove left hand wand spray bracket. b. Installation. (1) Install right hand spray wand bracket (14) on main frame (15) with two screws (13), lockwashers (12), and nuts (11). NOTE If installing left hand spray wand bracket, perform Steps (2 and 3). Otherwise, go to Step (4). (2) Repeat Step (1) above to install left hand spray wand bracket. (3) Install hydraulic tee (para 4-136). 4-322

Privacy Statement
Press Release
Contact