TM 5-3895-370-14&P
(5)
Open gage box (17) and remove foam bottom (18).
(6)
Remove nut (19), lockwasher (20), and gage box (17) from tool box (5). Discard lockwasher.
(7)
Remove three nuts (21), lockwashers (22), screws (23) and cover (24) from gage box (17). Discard lockwashers.
(8)
Remove two nuts (25), lockwashers (26), screws (27) and hasp (28) from gage box (17). Discard lockwashers.
c.
Cleaning/lnspection.
WARNING
Unsafe welding practices can cause serious injury from fire, explosions, or harmful
agents. Allow only authorized personnel to weld or cut metals, and follow safety
precautions in TC 9-237. Protective clothing and goggles must be worn, adequate
protective equipment used, a suitable fire extinguisher kept nearby, and
requirements of TC 9-237 strictly followed.
(1)
Inspect all welded surfaces for cracks or other damage. Weld damaged areas in accordance with TC 9-237.
4-327
