TM 5-3895-370-14&P
4-131. WHEEL CHOCK ASSEMBLY REPLACEMENT (CONT).
(5)
Remove six locknuts (10), 12washers (11), six
screws (12), and bracket (7) from fender (13).
Discard locknuts.
b. Installation.
(1)
Install bracket (7) on fender (13) with six screws
(12), 12 washers (11), and six locknuts (10).
(2)
If removed, install latch (9), wire rope (4), and
ring (8) on chock (6).
(3)
Install wire rope (4) and chock (6) on bracket (7).
(4)
Install metal strip (5) on wire rope (4).
(5)
Install two u-bolts (3), bases (2), and four nuts
(1) on wire rope (4).
END OF TASK
4-344
