TM 5-3895-370-14&P
(6) Install bushing (19) in frame half (10).
(7) Install bushing (19) in other frame half (9).
NOTE
Apply light coat of lubricating oil to
inside
of
ratchet
pawl
prior
to
assembly.
(8)
Install spring (18), lockwasher (17), spacer (16),
ratchet pawl (15), screw (14), and nut (13) on
frame half (10). Tighten nut 24 to 27 lb-ft (33-37
Nm).
NOTE
·
Apply light coat of lubricating oil to bushings prior to installing shaft in frame
halves.
·
Ratchet pawl may have to be pushed up to engage teeth on ratchet gear when
installing drum assembly.
(9)
Install drum (12), brake disc (11), and shaft (4) on frame halves (9 and 10).
(10)
Install two washers (8), spacers (7), screws (6), and locknuts (5) on frame halves (9 and 10). Do not overtighten
nuts.
(11)
Install spacer (3), two jamnuts (I), winch handle (2), and jamnut (1) on shaft (4). Tighten jamnuts 35 to 45 lb-ft (47
- 61 Nm).
4-341
