TM 5-3895-370-14&P
(b)
Fog inside of air cleaner cannister with about one ounce of preservative oil (item 36, Appendix E).
CAUTION
Preservation oil will damage non-metallic air filter parts. Care should be used when
applying preservation oil to air filter non-metallic parts.
(c)
Dip removed metallic air cleaner components in preservative oil (item 36, Appendix E).
(d)
Install air cleaner components (para 4-37).
(e)
Wrap air intake restriction indicator with barrier material (item 26, Appendix E).
(f)
Remove air elbow hose (para 4-38).
(g)
Fog inside of intake pipe with about one ounce of P-20 preservative oil (item 38, Appendix E).
(h)
Install air elbow hose (para 4-38).
(7)
Prepare exhaust system for long term storage:
(a)
Clean painted and unpainted surfaces of exhaust pipes, hose, and muffler and resonator of dirt, rust, and
scale.
(b)
Remove muffler and resonator (para 4-49).
(c)
Repaint marred and damaged areas of exhaust outlet pipe.
(d)
Fog inside of exhaust outlet pipe with about two ounces of preservative oil (item 36, Appendix E).
(e)
Fog inside of muffler and resonator and exhaust hose with preservative oil (item 36, Appendix E).
(f)
Coat unpainted surfaces of muffler and resonator, exhaust hose, and exhaust pipes with P-19 preservative oil
(item 43, Appendix E).
(g)
Install muffler and resonator (para 4-50).
(8)
Prepare drive belt and pulleys for long term storage:
(a)
Remove drive belt from belt tensioner (para 4-61). Do not remove belt from engine.
(b)
Coat surfaces of unpainted pulley grooves with preservative oil (item 37, Appendix E).
(c)
Attach tag to drive shaft pulley stating: "DRIVE BELT REMOVED REINSTALL BEFORE STARTING
ENGINE."
(9)
Prepare batteries for long term storage:
(a)
Remove battery cables (para 4-84).
(b)
Coat battery terminals and cable connectors with P-6 preservative oil (item 39, Appendix E).
(c)
Cover battery terminals and cable connectors with barrier material (item 25, Appendix E) and secure it with
tape (item 53, Appendix E).
4-471
