TM 5-3895-370-14&P
4-161. FLUSHING TANK, HOSE, AND FITTINGS REPLACEMENT/REPAIR (CONT).
c. Cleaning/lnspection.
WARNING
·
Fuel is very flammable and can explode easily. To avoid serious injury or death,
keep fuel away from open fire and keep fire extinguisher within easy reach when
working with fuel. Do not work on fuel system when engine is hot. Fuel can be
ignited by hot engine. When working with fuel, post signs that read NO
SMOKING WITHIN 50 FEET (15 m) of vehicle.
·
Compressed air used for cleaning purposes will not exceed 30 psi (207 kPa). Use
only
with
effective
chip
guarding
and
personal
protective
equipment
(goggles/shield, gloves, etc.).
(1)
Clean all parts with kerosene and dry with compressed air.
(2)
Inspect tank for corrosion, cracked welds, and obvious damage.
(3)
Inspect all parts for cracks, worn threads, and obvious damage.
(4)
Inspect fuel gage face for clarity.
(5)
Replace all parts failing inspection.
d. Assembly.
(1)
Install lock (8) on breather (9).
(2)
Install breather (9) and fuel gage (6) on tank (5).
(3)
Aline lock (8) and tighten setscrew (7).
4-466
