TM 5-3895-370-14&P
(8)
Adjust pump rate, if necessary, as established in step (3).
(9)
To begin spraying, pull bar off/bar spray lever (10) to the rear as the distributor (11) is towed along surface
to be sprayed.
(10)
When spraying is completed, move bar off/bar spray lever-(10) forward.
(11)
Reduce pump rate to 0 GPM by moving pump transmission control lever (9) to neutral and return engine
RPM to 1200.
(12)
Begin suckback bar procedures by placing valves in the following positions (Suckback Bar, Figure 2-2,
Sheet 3):
(a)
Place valve #1 (1) in the tank position.
(b)
Close valve #2 (2).
(c)
Open valve #3 (3).
(d)
Close valves #4 (4), #5 (5), and #6 (6).
(e)
Slowly move pump transmission control lever (9) to forward (FWD) and run system at 150 GPM for 30
seconds.
2-53
