TM 5-3895-370-14&P
2-24. HAND SPRAY OPERATION.
a.
Introduction. Use hand spray for areas difficult or impossible to reach with spraybar. If hand spray will be used
after spraybar has been used, suckback and flush spraybar before using hand spray. Refer to Spraybar Operation (para
2-22).
b.
Hand spray Operation.
(1)
Ensure engine RPM is 1200 and pump rate is 0 GPM.
(2)
Place valves in the following positions (Transfer/Circulate Tank, Figure 2-2, Sheet 3):
(a)
Place valve #1 (1) in the tank position.
(b)
Open valve #2 (2).
(c)
Close valves #3 (3), #4 (4), #5 (5), and #6 (6).
2-59