HOW TO LOCATE REPAIR PARTS

EXPLANATION OF INDEX FORMAT AND COLUMNS (SECTION IV) - TM-5-4320-301-13P_100

TM-5-4320-301-13P Pump Centrifugal: Self-Priming Diesel Engine Driven Wheel Mounted 8 Inch 1500 GPM at 80 Foot Head (Model US90 CCD-1) Manual
Page Navigation
72

TM5-4320-301-13&P TM08936A-13&P/1 (2) FIG. Column. This column lists the number of the figure where the item is identified/located. The figures are in numerical order in Section II and Section III. (3) ITEM column.The item number identifies the item associated with the figure listed in the adjacent FIG. column. This item is also identified by the NSN listed on the same line. b. PART NUMBER INDEX. Part numbers in This index are listed by part number in ascending alpha- numeric sequence (i e., vertical arrangement of letter and number combination which places the first letter or digit of each group in order A through Z, followd by the numbers 0 through 9, and each following Ietter or digit in like order). (1) CAGEC CoIumn. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code used to identify the manufacturer, distributor, or Government agency/activity that supplies the item. (2) PART NUMBER CoIumn. Indicates the primary number used by the manufacturer (individual, firm, corporation, or Government activity), which controls the design and characteristics of the item by mean: of its engineering drawings, specifications, standards, and inspection requirements to identify an item or range of items. (3) STOCK NUMBER Column. This column lists the NSN for the associated part number and manufacturer identified in the PART NUMBER and CAGEC columns to the left. (4) FIG. CoIumn. This column lists the number of the figure where the item is identified/located in Section II and Section III. (5) ITEM Column. The item number is that number assigned to the item as it appears in the figure referenced in adjacent figure number column. c. FIGURE AND ITEM NUMBER INDEX. (1) FIG. CoIumn. This column lists the number of the figure where the item is identified/located in Section II andSection III. (2) ITEM Column. The item number is that number assigned to the item as it appears in the figure referenced in the adjacent figure number column. (3) STOCK NUMBFR CoIumn. This column lists the NSN for the item. (4) GAGEC CoIumn_tThe Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code used to identify the manufacturer, distributor, or Government agency/activity that supplies the item. (5) PART NUMBER Column. Indicates the primary number used by the manufacturer (individual, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications, standards, and inspection requirements to identify an item or range of items. 5. SPECIAL INFORMATION. a. USABLE ON CODE The usable on code appears in the lower left comer of the Description Col- umn heading. Usable on codes are shown as “UOC:..“in the Description Column (justified left) on the Iast line of the applicable item description/nomenclature. Uncoded items are applicable to all models. b. FABRICATION INSTRUCTIONS. Bulk materials required to manufacture items are listed in the Bulk Material Functional Group of this RPSTL Part number for bulk materials are also referenced in the description column of the line entry for the item to be manufactured/fabricated. c. lNDEX NUMBERS. Items which have the word BULK in figure column will have an index num- ber shown in the item number column. This index number is a cross-reference between the National Stock Number/part Numbr Index and the bulk material list in Section II. 6. HOW TO LOCATE REPAIR PARTS a. When National Stock Numbers or Part Numbers are NOT Known. (1) First Using the table of contents, determine the assembly or subassembly group to which the item belongs. This is necessary since figures are prepared for assembly groups and subassembly groups, and listings are divided into the same groups. C-5

Privacy Statement
Press Release
Contact