Section I. INTRODUCTION

Section III. TOOLS AND TEST EQUIPMENT REQUIREMENT

TM-5-4320-301-13P Pump Centrifugal: Self-Priming Diesel Engine Driven Wheel Mounted 8 Inch 1500 GPM at 80 Foot Head (Model US90 CCD-1) Manual
Page Navigation
68

TM5-4320-301-13&P TM08936A-13&P/1 APPENDIX C OPERATORS. UNIT, AND DIRECT SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST Section I. INTRODUCTION 1. SCOPE. This RPSTL lists and authorizes spares and repair parts; special trek; special test, mea- surement,and diagnostic equipment (TMDE); and other special support equipment required perfomance of operator's,unit, and direct support maintenance of the Forward Area Water Point Supply System. It autho- rizes the requiitioning, issue, and disposition of spares, repair parts and special tools as indicated by the source, maintenanceand recoverability (SMR) codes. 2. GENERAL tin to this section, Introduction, this Repair Parts and Special Tools List is divided~ into the following sections: . a. Section II. Repair parts List. A list of spares and repair parts authorized by this RPSTL for use in the performance of maintenance. This list also includes parts which must be removed for replacement of the authorized parts. Parts Iists are composed of functional groups in ascending alphanumeric sequence, with the partrs in each group Iisted in ascending figure and item number sequence. Bulk materials are Iisted in item name sequence. Items are shown in the associated illustration(s)/figure(s). b. Section III. Special Tools List. A list of special tools, special TMDE, and other special support quipment authorized by this RPSTL (as indicated by basis of Issue (BOI) informaion in DESCRIPTION AND USABLE ON DODE column) for the performance of maintenance. c. Section IV. Cross-References Indexes. A list, in National Item identification Number (NIIN) se- quence, of all National stock numbered items appearing in the listing, followed by a list in alphanumeric se- quence of all part numbers appearing in the listings. National stock numbers and part numbers cross refer- enced to each illustration figure and item number appearance. The fiqure and item number index Iists figure and item numbers in asphanumeric sequence and cross references NSN, CAGEC and part number. 3.EXPLANATION OF C O L U M NS (SECTIONS II AND III). A. ITEM NO. (COLUMN (1)). Indicates the number used to identify items called out in the illustration. b. SMR Code (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-posi- tion code containing supply/requisitioning information, maintenance category authorization criteria, and dis- position instruction, as shown , in the following breakout. Source code Maintenance Code How you get 3rd position 4th position an item Who can install who can do replace or use the complete repair’ item on the item Recoverability Code Who determines disposition action on an Unserviceable item C - 1

Privacy Statement
Press Release
Contact