Section III OPERATOR MAINTENANCE PROCEDURES

Table 3-1. Operator Troubleshooting (Cont'd.) - TM-5-4320-301-13P_53

Section III OPERATOR MAINTENANCE PROCEDURES (Contd.) - TM-5-4320-301-13P_55

TM-5-4320-301-13P Pump Centrifugal: Self-Priming Diesel Engine Driven Wheel Mounted 8 Inch 1500 GPM at 80 Foot Head (Model US90 CCD-1) Manual
Page Navigation
29

TM 5-4320-301-13&P TM 08936A-13&P/1 Section III OPERATOR MAINTENANCE PROCEDURES 3-4. NOZZLE STAND ASSY INSPECT/REPLACE. Remove stand assy from system by folding up. INSPECT AND CLEANING a. b. Dry-cleaning solvent, P-D-680, used to clean parts is potentially dangerous to personnel and property. Avoid inhalation of fumes and repeated or prolonged skin exposure. Wash exposed skin thoroughly with soap and water. Use in well ventilated area away from open flame or excessive heat. Flash point is 100°F (38°C). Wash all parts in cleaning solvent P-D-680 to remove all dirt and foreign matter. Dry with clean lint free cloth. Inspect nozzle stand assy in accordance with PMCS. 3 - 4

Privacy Statement
Press Release
Contact