Figure 4-3 Drum attached to cargo truck for towing

Section II REPAIR PARTS, SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT

TM-5-4320-301-13P Pump Centrifugal: Self-Priming Diesel Engine Driven Wheel Mounted 8 Inch 1500 GPM at 80 Foot Head (Model US90 CCD-1) Manual
Page Navigation
37

TM 5-4320-301-13&P TM 08936A-13&P/1 4-2.1 MOVEMENT OF FILLED DRUM BY CARGO TRUCK. A filled drum maybe moved short distances, at a speed not to exceed 10 mph (16km/hr), by towing with the towing and lifting yoke as shown in figure^-4-3. Figure 4-3 Drum attached to cargo truck for towing a. b. c. Unfold the towing and Iiftng yoke and connect the two braces. Install the screws in the braces Place the shackles in the slots in the end of eack connecting leg and install each quick release pin in each connecting leg. d. Connect the towing and lifting yoke to the cargo truck pintle hook. e. When the drum has been towed to the new location, remove the towing and lifting yoke as follows: (1) Disconnect towing and lifting yoke from the cargo truck pintle hook. (2) Remove the quick release pin from each connecting leg and pull the shackles from the slots. (3) Remove the screws from the braces. (4) Seperate the two braces and fold the towing and Ming yoke. Change 5 4-5

Privacy Statement
Press Release
Contact