TM 5-4610-228-13
TM 08846A-13/1
5-9. HYPOCHLORINATOR PUMP/REPAIR (CONT).
LOCATION/ITEM
ACTION
REMARKS
b.
c.
d.
e.
f.
g.
h.
i.
Insert Push rod (4) in hypochlorinator housing assembly. Place
washer (2) on push rod (4), press firmly in place over threads of
push rod (4).
Place spring (6), spring spacer (7) and diaphragm clamping
washer (8), on push rod (4), press firmly in place over threads of
push rod (4).
While holding diaphragm clamping washer (8) in place, install
impulse diaphragm (9), and wssher (10) on push rod (4) with nut
(11).
Aline slots of impulse diaphragm (9), with holes in
hypochlorinator housing assembly (3).
Aline diaphragm cap (12), with holes in hypochlorinator housing
(3), and secure in place with four hex head screws (17) and nuts
(18).
Install stroke adjustment knob (14), in diaphragm cap (12) by
turning stroke adjustment (14), clockwise.
Screw diaphragm (3) into back of hypochlonnator by turning
diaphragm (3), clockwise.
Place liquid head in position on back of hypochlorinator and
secure in place with eight screws and washers (2).
j. Place hypochlorinator in position on Hypochlorinator Unit frame,
and aline with three holes in tie.
5-15
